Product numbers are usually located on the bottom of the product near the company address, on the front or back of the instruction manual or above the UPC symbol on the packaging. It could be five numbers, a letter followed by four numbers or three letters followed by two numbers.
73397, W7124, AAB25
Manufacturing Codes can be found on the bottom of the product and will usually be engraved into the plastic. These codes can also be found on the packaging, near the UPC symbol, either on a sticker or embossed on the cardboard. The code will start with a 0, 1, 2, or 3. The first number will be followed by three additional numbers, and then two letters or a letter and another number.
Bottom of Tub
Bottom of product
Underside of the Vibrating Unit
Printed on Product Label
Back of Seat
Bottom of Seat Ring
Underside of Seat or Back of Tank
Rock ‘n Play
Inner portion of the folding hubs
Swing - Full Size
Underside or back of motor housing, or engraved into the seat
Swing - Take Along
On the side of the swing’s non-motorized housing
On a white sticker inside the battery compartment, under the hood or in the vehicle near driver's door
Product numbers are located in product playbooks (instructions) and on packaging near the UPC barcode. It could be 3, 4, or 5 numbers or 3 letters followed by 2 numbers.
Manufacturing Codes can be found printed or stamped near the bottom of the packaging or in the area above the UPC barcode. In some cases, it can also be stamped on random blocks. The code will start with a letter, then followed by 5 numbers and 2 letters.
Please provide the numbers below the UPC barcode.
*All numbers are engraved into the plastic unless otherwise noted.